Filter
Top Products
2.2 COMMAND LIST
The various commands are split in different groups, depending on the involved functionality, and are
listed here in accordance with their group classification.
The command-line interface includes a command auto-completion feature. Normally, typing a
command without any parameter displays usage information on the command. A help command is
also available.
Note that all commands are case-sensitive.
2.2.1 General command group
The general command group consists of the following commands:
Command Parameters Description
help
general | network | dns |
user | service |
time | smtp | snmp |
trap | ups | rccmd |
events | log
Show help information
general shows all general commands
network shows all network commands
etc …
list List all available commands
version Display the board FW version
logout
User logout
NOTE: Auto-logout after 10 min inactivity
exit User logout
Change current user password
passwd
NOTE: Password length is limited to 8 chars.
The command line interface may accept longer passwords, although
only the first 8 characters are significant.
ping [hostname] | [X.X.X.X]
Ping IP address or hostname
hostname fully qualified hostname
X.X.X.X IP-address
nvdefault Reset the configuration to factory default
nvsave Save changes to non-volatile memory
nvdump Dump configuration file (gedeups.cfg) to FTP area
Update the SNMP/Web configuration with the gedeups.cfg file from
the FTP area
nvupdate
NOTE: The adapter performs no checks on the received file. Make sure
the file format is correct - unexpected behaviour may occur.
upgrade
Start the upgrade with the uploaded firmware
NOTE: FW file to be uploaded via FTP
reboot
System restart (soft-reset)
NOTE: All unsaved changes will be lost
Modifications reserved Page 14/58
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc Operating Manual SNMP/Web Adapter