Filter
Top Products
Safety Precautions & Declared Material
Fiber Optic Line Precautions
Before turning on the equipment, make sure that the fiber optic cable is intact and is
connected to the transmitter.
Do not attempt to adjust the laser drive current.
Do not use broken or non-terminated fiber optic cables/connectors or look
straight at the laser beam.
ATTENTION: The laser beam is invisible!
The use of optical devices with the equipment will increase eye hazard.
CLASS 1 LASER PRODUCT
Complies with IEC 60 825-1:1993 + A1:1997 + A2:2001, and EN 60825-1:1994
+ A1:1996 + A2:2001
General Equipment Precautions
Use of controls, adjustments, or performing procedures other than those
specified herein, may result in hazardous radiation exposure.
When working with an IDU, note the following risk of electric shock and
energy hazard: Disconnecting one power supply disconnects only one power
supply module. To isolate the unit completely, disconnect all power supplies.
Machine noise information order - 3. GPSGV, the highest sound pressure
level amounts to 70 dB (A) or less, in accordance with ISO EN 7779.
!!
!!
!!
!!
!!
!!
!!