Filter
Top Products
2-32 MDS Intrepid-HC HP Installation and Operation
LOF
IDU
ODU
Cable
Remote
The default alarm output setting for each relay is “Power”.
The relays may be connected to customer-specific applications. Refer to Appendix B for details concerning the
alarm connector pin assignments.
6. After you complete the configuration, click Apply to save the settings.
7. Click Close.
Exiting the NMS
To exit the NMS, select File, Exit in the main window.
Connecting Line Interfaces
After configuring the system in accordance with the previous sections, the line interfaces can be connected to the
IDU.
For a description of the line interfaces, see the System Descriptions guide.
Note the following interface terminology:
For connectors or signals labeled TX, the signals are sent from the transceiver.
For connectors or signals labeled RX, the signals are sent to the transceiver.