Filter
Top Products
2-10 MDS Intrepid-HC HP Installation and Operation
Local/Remote Transport Configuration
The Local/Remote Transport Configuration window allows you to change threshold levels for the radio and alarms,
and to configure special transmission parameters. This is recommended for advanced users only.
Note: You will need to restart the NMS if you change the transport protocol.
1. Select Configuration, Local/Remote, IDU, Transport.
The Transport Configuration window appears.
Transport Configuration Window
2. The Protocol field displays the current data transfer protocol. To change the protocol, click the drop down list
and select SDH, SONET, or SONET-C.
3. Click Apply to save the settings.
4. Click Close.
Trap Forwarding Configuration
This section explains how to set up a trap forwarding plan. If your application does not require trap forwarding, you
can skip the following procedure.
1. Select Configuration, Local/Remote, Management System, Traps Configuration, or click the Traps
Configuration icon.
The Trap Forwarding Configuration window appears.