Filter
Top Products
2-4 Section 2: Getting Started
February 3, 2000 70055MP Revision D
Operating Conditions Button
The Operating Conditions button is located directly below and left
aligned with the display. Pressing the Operating Conditions button
displays the sensor value readings. Four channels are displayed
simultaneously. The display includes:
• Channel number.
• Channel name.
• Present reading.
• Units.
After all sensor screens are displayed, pressing the Operating
Conditions button again displays the tap change summary screen.
During tap position calibration, the Operating Conditions button is used
to adjust settings.
Alarm Status & Settings Button
The Alarm Status & Settings button is located directly below and right
aligned with the display. Pressing Alarm Status & Settings displays
the monitor status and the date and time. If there are alarm conditions,
pressing Alarm Status & Settings scrolls through descriptions of alarm
conditions.
During tap position calibration, the Alarm Status & Settings button is
used to adjust settings.
Acknowledge Alarm Button
The Acknowledge Alarm button is located in the lower left corner of
the face panel. Pressing Acknowledge Alarm resets the alarm relay;
however, the indicator remains lit for the duration of the alarm
condition.