Filter
Top Products
3-12 Section 3: Installation
February 3, 2000 70055MP Revision D
0 to +5 VDC or 0 to +10 VDC Power
Connect the OEM potentiometer to the LTC-MAP Circuit Board, as follows
(refer to Figure 3-6):
1. Connect the OEM Potentiometer Wiper to Sensor Input #8.
2. Connect the OEM Potentiometer 0 VDC Common Point to Sensor
Common.
Figure 3-6: Typical OEM Potentiometer with 0 to +5 VDC Power