Filter
Top Products
1-2 Section 1: Introduction
February 3, 2000 70055MP Revision D
LTC-MAP 2130 Monitor is a multi-input data storage and analysis
system. Each system features:
• Seventeen (17) analog input channels.
• Sixteen (16) digital input channels (via optional Control Isolator).
• One (1) serial port/modem line.
• Two annunciator relay outputs (form C contacts).
LTC-MAP 2130 uses state of the art technology to process, analyze,
and store data into a configurable profile. A built-in microprocessor
compares, computes, and relates stored data to set parameters.
Alarms are generated when data levels exceed the set parameters.
NOTE: Parameters are set via the SAGE host software package.
Refer to the SAGE Product Manual, Part No. 70057MP, for details
on parameter configuration and data retrieval and analysis.
Data profiles and alarm events are stored in non-volatile random-
access memory. The stored information is then downloaded to a
personal computer, either directly through the serial port or via an
optional modem. The SAGE host software package allows data
retrieval and analysis.