Filter
Top Products
Appendix B: Firmware Upgrades B-3
70055MP Revision D February 3, 2000
16. Re-install the hardware that secures the CPU board to the face panel.
17. Re-install the ribbon cable and modem serial port connector.
18. Remove the static control wrist strap.
19. Re-install F1 in the power circuit board.
20. Depress the Operating Conditions and Alarm Status & Settings buttons
while applying power to the system.
21. Verify that the LTC-MAP displays copyright information for ten seconds
before going blank.
NOTE: If the copyright information does not appear, and you have
checked the EPROM installation, contact Reuter-Stokes, Inc..
22. Place the old EPROM in the protective packaging and return it to
Reuter-Stokes, Inc.