Filter
Top Products
Rev. 051208 page 106 of 152
Show all configuration parameters
Command Name
system show config
Description Displays the software version, the mac address, and status of gigabit ports.
Syntax
system show config
Parameters
None
Example N-TRON/Admin#[32]system/show> config
System Configuration :
Product Configuration : 7014FX2
Software Version : 1.1.8
MAC Address : 00:07:af:ff:e5:60
IP Configuration Mode : manual
System IP Address : 192.168.1.244
Subnet Mask : 255.255.255.0
Gateway Address : 192.168.1.1
System Name : N-TRON Switch
System Contact : N-TRON Admin
System Location : Mobile, AL 36609
System Up Time : 0 days:0 hours:28 mins:43 secs
Total Number of Ports : 14
Port # 1 - 12 : 10/100 Mbps Copper and/or
100 Mbps Fiber
Port # 13 : Gigabit Transceiver
Port # 14 : Gigabit Transceiver
Notes
Show all configuration parameters related to SNMP manager
Command Name
system show snmpinfo
Description To show all the configuration parameters related to snmp manager
Syntax
system show snmpinfo
Parameters
None
Example N-TRON/Admin#[33]system/show> snmpinfo
System SNMP Configuration :
IP Address - Trap Station#1 : 192.168.1.2
IP Address - Trap Station#2 : Value Not Configured
IP Address - Trap Station#3 : Value Not Configured
IP Address - Trap Station#4 : Value Not Configured
IP Address - Trap Station#5 : Value Not Configured
SNMP Get Community Name : public
SNMP Set Community Name : private
SNMP Trap Community Name : public
Notes
System Restart
Command Name
system restart
Description To restart (reboot) the device
Syntax
system restart
Parameters
None
Example
N-TRON/Admin#[1]> system restart
Do you Want to Restart the System Now: [y/n]y
Do you Want to Save the Configuration: [y/n]y
................
................
Notes