Gigabyte 7014 Switch User Manual


 
Rev. 051208 page 130 of 152
Display List of Configured Static MAC Addresses
Command Name
bridge show staticmac
Description To view the list of configure static mac addresses
Syntax
bridge show staticmac <all|multicast|unicast>
Parameters
<all|multicast|unicast>
which set of static mac addresses to show
Examples
N-TRON/Admin#[1]> bridge show staticmac all
N-TRON/Admin#[2]> bridge show staticmac multicast
N-TRON/Admin#[3]> bridge show staticmac unicast
NOTES
These are egress filters.
Set Aging Time
Command Name
bridge set agingtime
Description Sets the aging time for dynamically learned MAC addresses of the chipset.
Syntax bridge set agingtime <aging-time>
Parameters
aging-time
aging time to be set for stp.
Minimum aging time can be 5 seconds.
Default aging time is 300 seconds.
Maximum aging time is 1000000 seconds.
Examples
N-TRON/Admin#[1]> bridge set agingtime 20
NOTES
Display Current Aging Time
Command Name bridge show agingtime
Description Displays the current aging time.
Syntax
bridge show agingtime
Parameters None
Examples
N-TRON/Admin#[1]> bridge show agingtime
NOTES
Display Mac Address by port
Command Name
bridge show macbyport
Description Displays all the MAC addresses associated with a port.
Syntax bridge show macbyport <portno|all>
Parameters
port-number
The port number must range between 1 and the maximum number of
ports on the switch.
all
Display MAC addresses for all ports
Examples
N-TRON/Admin#[1]> bridge show macbyport 6
NOTES
Display port by Mac Address
Command Name
bridge show portbymac
Description Display the port number to which the mac is associated.
Syntax bridge show portbymac <mac-address>
Parameters
mac-address
Unique unicast mac address.
Examples
N
-
TRON/Admin#
[
1
]>
bridge show portbymac 00
-
a0
-
ae
-
60
-
3a
-
70
NOTES