Rev. 051208 page 110 of 152
FTP Commands
Set Username
Command Name
ftp set username
Description To set the user name which will be used to log into the FTP server
Syntax ftp set username <Username>
Parameters
Username
The user name for logging on to the FTP server
Example eg.1
N-TRON/Admin#[1]> ftp set username ntron
eg.2
N-TRON/Admin#[1]> ftp set username admin
Notes The user name should be a valid one; else logging into FTP server will
fail.
Set Password
Command Name
ftp set password
Description To set the password for the above user name
Syntax
ftp set password
Parameters
Password
Password for the above user required to log into the FTP server
Example
N-TRON/Admin#[1]> ftp set password
Enter the password : ******
Notes The password should be a valid one for the user; else logging into the
FTP server will fail.
Set IP Address of FTP server
Command Name
ftp set serverip
Description To set the IP address of the FTP server to be used for establishing the
FTP connection for transfer of files/data
Syntax ftp set serverip <Server-IP-address>
Parameters
Server-IP-address
The IP address of the FTP server in decimal dotted notation for
establishing a FTP connection
Example eg.1
N-TRON/Admin#[1]> ftp set serverip 10.1.1.100
eg.2
N-TRON/Admin#[1]> ftp set serverip 15.1.1.150
Notes The IP address of the FTP server should be a valid IP address (excluding
Class D & Class E types). The IP address should also be a valid FTP
server IP in order to ensure successful connection establishment.
Set Name of the Remote File
Command Name
ftp set remotefile
Description To set the name of the remote file which has to be retrieved from the
FTP server
Syntax ftp set remotefile <Remote-file-name>
Parameters
Remote-file-name
Name of the file to retrieved from the FTP server including the
complete path
Example eg.1
N-TRON/Admin#[1]> ftp set remotefile Flash
eg.2
N-TRON/Admin#[1]> ftp set remotefile /usr/local/ftp/flash
Notes The file name (including the complete path) should be a valid name else
retrieval of the file would fail.