Filter
Top Products
Rev. 051208 page 137 of 152
N-Ring VLAN ID is set to: 3333
N-Ring Tagging is set to: Tagged
................
................
Device is Going for Reboot....
NOTES
NOTE: N-Ring Manager cannot have RSTP enabled.
Do not use Trunking on a switch that is directly in an active N-Ring.
N-Ring show status
Command Name
n-ring show status
Description Shows the current N-Ring status of the switch. If Manager, shows ring members. Shows if Automember
or active member. If active (manager or member) shows N-Ring ports.
Syntax
n-ring show status
Parameters
None
Examples
On an N-Ring Manager:
N-TRON/Admin#[1]> n-ring show status
Switch is in N-Ring Manager Mode
N-Ring OK
Port 1 | Port 2
=================
1 | 2
No: | MAC Address | IP Address | Subnet Mask | Port 1 | Port 2
===============================================================================
1 | 00:07:af:ff:f6:40 | 192.168.1.233 | 255.255.255.0 | 1 | 2
On an N-Ring Active Member:
N-TRON/Admin#[1]> n-ring show status
Switch is a N-Ring Member
N-Ring Manager is 00:07:af:ff:f6:c0
Port 1 | Port 2
=================
1 | 2
-------------------------------------------------------------------------------
On an N-Ring AutoMember (not active):
N-TRON/Admin#[2]n-ring/show> n-ring show status
Switch is in Auto Member Detection Mode
NOTES