Filter
Top Products
Rev. 051208 page 108 of 152
Modify a User’s Password
Command Name
system modify userpassword
Description To change a user’s password
Syntax system modify userpassword <username>
Parameters
Username
The user’s username that is to be modified
Password
The new password for the user
Example
N-TRON/Admin#[1]system/modify> userpassword ntron
Enter New Password :*****
Confirm New Password :*****
Password has been modified successfully
Notes A user with user permissions can operate this command, but will be
prompted for the old password before being prompted for the new
password.
Remove a System User
Command Name
system remove user
Description To remove a user from the users list
Syntax
system remove user <username>
Parameters
username
The user’s username that is to be removed
Example
N-TRON/Admin#[1]> system remove user ntron
Do you really want to delete the above user: [y/n]y
User successfully deleted
Notes Only users with admin permissions can operate this command.
Image Loader Commands
Download Image through COM port
Command Name
image download
Description To download new firmware image through the serial port on the switch.
Syntax
image download
Parameters
None
Examples
N-TRON/Admin#[1]> image download
NOTES Uses XModem protocol when transferring the file. N-Tron recommends
that you use TFTP or FTP when updating the firmware. TFTP and FTP
are both much faster.