Filter
Top Products
GN-A16B Wireless Access Point User Guide
IP Config Page
The IP Configure tab allows you to configure the IP parameters of the access point.
1 IP Address
1 Subnet Mask
1 Gateway
After you change the IP address of the AP, please also change the PC’s (AP Manager)
IP address to the same subnet. And then click the “Find Access Point” icon; AP
manager will search the AP on the network.
Enter the IP address of the default route. The default gateway is 192.168.1.254.
Specify the subnet mask of the access point. The default subnet mask is
255.255.255.0.
Use this option to assign an IP address to the access point. The default IP address
is 192.168.1.1. Please make sure the assigned IP address is unique on your
network.