Filter
Top Products
GN-A16B Wireless Access Point User Guide
35
Wireless Advanced Settings
Normally, you can have the wireless works smoothly even you didn’t change any item in
this page.
1 Authentication Type
You may choose between “Open System”, “Shared Key”, and “Auto”. The
Authentication Type default is set to “Auto”.
Open System in which the sender and the recipient do NOT share a secret key.
Each party generates its own key-pair and asks the receiver to ac
cept the randomly generated key. Once accepted, this key is used
for a short time only. Then a new key is generated and agreed upon.
Shared Key is both the sender and the recipient share a secret key.
1 Fragment Threshold
This value indicates how much of the Access Point’s resources are devoted to
recovering packet errors. The value should remain at its default setting of 2346. If
you have decreased this value and experience high packet error rates, you can
increase it again, but it will likely decrease overall network performance. Only minor
modifications of this value are recommended. The setting range is 256 ~ 2346.
1 RTS Threshold
This value should remain at its default setting of 2347. Should you encounter
inconsistent data flow, only minor modifications are recommended. The setting range
is 0 ~ 2347.