Filter
Top Products
GN-A16B Wireless Access Point User Guide
1 Beacon Interval
The beacon interval is the amount of time between access point beacon transmissions.
The default value for this interval is generally 100ms, that is 100 beacons sent every
second.You can increase the beacon interval and have lower overhead on the network,
but then roaming will likely suffer. It's best to leave this setting alone.
1 Data Rate
You can select one of the rates among 1M, 2M, 5.5M and 11M based on your need.
The default value is “Auto”.
1 Preamble Type
The preamble field shall be provided so that the receiver can perform the necessary
operations for synchronization. Under this option two setting are possible: “Long” or
“Short”. The default value is “Long”.
1 Broadcast SSID
Enabled or Disabled the broadcast of the SSID name across the network.
Verify the desired setting and then click the “Apply Changes” button to set the value into
access point.