Filter
Top Products
20
The Wireless Configuration Screen
The Wireless Configuration screen allows you to configure the Router’s
WLAN function.
The 802.11g Tab
Figure 6-6 – 802.11g Main Config Page
Region
Indicates the geographical region you are in. Verify that the region
indicated is correct. If not, please contact your local distributor or dealer
immediately.
802.11g Only Mode
The mixture of both 11b and 11g traffic on your wireless network results
in the reduction of the network performance. For this reason, the
802.11g Only Mode allows you to restrict all traffic to 11g (54Mbps)
traffic only. Keep in mind, however that enabling this feature comes at
the expense of eliminating all 11b based traffic by the AirCruiser G.
Enable will restrict all traffic to 802.11g traffic, while disable will allow a
mixture of both 11b and 11g. The default setting is Disable.
Auto Channel Select
The Router uses channel 6 as the default channel. Enabling Auto
Channel Select allows the Router to auto-select a non-conflicting
channel.