Gigabyte M1405 Laptop User Manual


  Open as PDF
of 65
 
English
52
Mycomputersays:“CMOSBatteryLow”,whatshouldIdo?
If your computer is without power (i.e. unplug the computer
power source from the power outlet and remove the battery
pack from it) for over 45 days, you would lose the information
storedinCMOS.Pleasefollowthestepsbelowtorecongure
your CMOS settings:
step1.PressF2toenterintotheBIOSsetuputility.
step2.Select“LoadOptionalDefaults?”Whenyouseethe
followingprompt,choose<OK>andthenpress<Enter>.
step3.Select“SaveChangesandExit”,select<OK>andpress
<Enter>torestartyourcomputer
How to unplug or eject devices?
1.Inthenoticationareanexttoyourtaskbar,double-clickon
theSafeRemovalicon.SaferemovaldisplaysalistofPlug
andPlaydevicesthatsupportsaferemovalandthatare
currently attached to the system. If you do not see the Safe
Removal icon, your device does not support safe removal,
and you cannot unplug or eject your device using Safe
Removal.
2. In Safely Remove Hardware, in the list of devices, select
the device that you want to unplug or eject, and then click
on Stop. This tells the system that you will be unplugging or
ejecting the device.
3.InStopaHardwaredevice,clickOK.Anoticationappears
stating that it is now safe to unplug or eject the device.
Caution
• Unpluggingorejectingadevicethatsupportssaferemoval
without first than using the Safe Removal application to
warn the system can cause data to be lost or your system
tobecomeunstable.Forexample,ifadeviceisunplugged
during a data transfer, data loss is likely. If you use Safe
Removal, however, you can warn the system before you
unplug or eject a device, preventing possible loss of data. if
you use Safe Removal, however, you can warn the system
before you unplug or eject a device, preventing possible loss
of data.
Note
• Forremovablestoragedevicesthatcansafelyberemoved
while the system is on, the system disables write caching by
default. It does this so the devices can be removed without
loss of data. When write caching is disabled, however, the
system will likely experience slower performance, so be sure
toenablewritecachingwhenyouhavenishedremovingthe
device.
Does the M1405 provide a hardware switch or function button to
enable/disable the Bluetooth function?
the M1405 provides a combined function button to enable/
disablethe3.5G(Fn+F10)andBluetooth(Fn+F11)functions.
What is the capacity of SDHC cards that M1405 can support?
ThespecicationofSDHCthatM1405SDcardreadersupports
shall be in accordance with that of the SD Association. Currently,
themaximumcapacityannouncedbySDAssociationis32GB
http://www.sdcard.org/developers/tech/sdhc/
 previous next