Filter
Top Products
Instructions
EM Drive
Lubricators
3A0415D
ENG
Provides a continuous, precise and temperature independent supply of grease or oil
lubrication to all lubrication points of sliding- and roller bearings, drive- and transport
chains, sliding guideways, open gears and seals. For professional use only.
Not approved for use in European explosive atmospheres.
75 psi (0.5 MPa, 5 bar) Maximum Working Pressure
This equipment is suitable for use in Class I,
Division 2, Groups A, B, C and D, Class II, Division
2, Groups F and G and Class III Hazardous
Locations or non-hazardous locations only.
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
EXPLOSION HAZARD
Substitution of components may impair
suitability for Class I, Division 2.
CUS
BAYZ,BAYZ7
92 UM