Filter
Top Products
Maintenance
3A0415D 13
• The “TIME” switches 1 and 2 of the 4-way
code switch in the drive unit match the
desired discharge period.
• All components are properly assembled
and screwed together hand tight.
To begin the discharge:
Turn the rotary switch from the
OFF position to the ON posi-
tion.
Maintenance
Changing the Lubrication
Canister
When the red and green LED light up at the
same time, the lubrication canister is empty
and should be replaced.
Removing Lubrication Canister
1. Switch the rotary switch
position from ON to OFF.
2. To disconnect adapter from lubrication
point, follow pressure relief procedure
provided on page 4.
3. Unscrew and completely remove adapter
(B) from the lubricator. Adapter will be
reused.
4. Unscrew cover from drive unit.
5. Remove drive unit from the lubrication can-
ister.
6. Remove old battery pack from drive unit.
NOTICE
• The battery pack must be replaced
every time you change a lubrication
canister to ensure correct lubricator
operation.
• The drive unit and circuit board must
always be protected from moisture to
prevent damaging these components.
Always change the lubrication canister
in a dry place.
FIG. 9
B