Filter
Top Products
Maintenance
14 3A0415D
Installing the New Lubrication
Canister
1. Install new battery pack in drive unit in the
direction of the arrows as shown in FIG. 10.
NOTE: Only replace the battery pack with a
Graco battery pack for EM Drive Lubricators,
part number 124261. Handle and dispose of
the battery pack properly.
2. If a different size lubrication canister or dis-
charge period is going to be used, change
dip switches to reflect the new canister size
and/or time change. See Table 1, page 8.
3. Prime the grease line and all accessories
with the same grease that is contained in
the lubricator (See Parts, page 16 for a
complete list of available grease car-
tridges).
4. Install reducers, extensions, grease line,
etc. (if necessary).
5. Place drive unit on top of new lubrication
canister until the teeth of both pieces are
locked.
6. Screw the cover of the drive unit onto the
lubrication canister - hand tighten only.
7. Remove the plug (A).
8. Install lubricator unit
into adapter (B).
9. Screw lubricator into
the lubrication point -
hand tighten only.
10.To begin the discharge refer to Operation,
page 12.
Sparking can occur when changing the bat-
tery pack. Only replace the battery pack in a
non-hazardous location, away from flammable
fluids or fumes.
FIG. 10
Direction Arrow
NOTICE
To ensure optimal lubrication:
• Seal threads of all connecting parts with a
suitable, standard sealant.
• Mount oil filled lubricators properly with the
outlet pointing down.
• Never screw in the lubricator a second time
or the self-sealing threads will be dam-
aged.
• For remote mounting installations, make
sure bracket does not squeeze the lubrica-
tion canister as this could block the piston
inside the canister.
A
B