Filter
Top Products
3–4 Set–Up and Installation
3.4 Installation in the Host Instrument
Caution: The 3700 contains static sensitive components. Precautions must be taken to
eliminate potential static discharge to the 3700.
Installation in the host instrument includes the following activities:
1) Power down the host system or instrument.
2) Mount the SCANTEAM 3700 in the host instrument. The 3700 has four mounting
holes (threaded inserts). Be sure to allow access to all cable connections. Figures
3.2 and 3.3 show the general dimensions for mounting the 3700.
3) Connect the 3700 RS–232 Communication Port to the host system I/O.
4) If applicable, connect your object sensor or hardware triggering device to the 3700.
5) Power up the host system or instrument.