Filter
Top Products
Configuring the SCANTEAM 3700 4–9
Set Communications Protocol Command Kf
COMMAND
<Kf mode>
Parameter ASCII Option
Mode 0 Disable RTS/CTS *
Disable XON/XOFF *
Disable ACK/NAK *
Mode 1 Enable RTS/CTS
Disable XON/XOFF
Disable ACK/NAK
Mode 2 Disable RTS/CTS
Enable XON/XOFF
Disable ACK/NAK
Mode 3 Enable RTS/CTS
Enable XON/XOFF
Disable ACK/NAK
Mode 4 Disable RTS/CTS
Disable XON/XOFF
Enable ACK/NAK
Mode 5 Enable RTS/CTS
Disable XON/XOFF
Enable ACK/NAK
Mode 6 Disable RTS/CTS
Enable XON/XOFF
Enable ACK/NAK
Mode 7 Enable RTS/CTS
Enable XON/XOFF
Enable ACK/NAK
Sending the configuration command Kf sets the communications protocol. The default
setting is Mode 0, with RTS/CTS, XON/XOFF, and ACK/NAK disabled.