Filter
Top Products
Chapter 4 31
Troubleshooting SCSI
Troubleshooting
command: SCSI rate 5 2
PCI device /5.2 = fast scsi
Display and Set SCSI IDs
1. Display the initiator (SCSI) IDs for all controllers, buses, and slots using the
SCSI command.
The following example shows the SCSI ID for the controller on bus 5 slot 2.
SCSI init 5 2
PCI device /5.2 = 7
Enter the command without specifying a bus or slot number to list initiator IDs
for all bus and slot numbers:
SCSI init
2. Set the initiator (SCSI) ID of an adapter using the SCSI command.
The following example sets bus 5 slot 2 to initiator ID 6 and displays the
results:
SCSI init 5 2 6
SCSI init 5 2
PCI device /5.2 = 6