Filter
Top Products
90 AppendixA
10/100Base-TX Interface Card Statistics
LAN Interface Status Display
LAN Interface Status Display
This appendix contains descriptions of the RFC 1213 MIB II statistics
fields for LAN interface cards which are displayed on the screen with the
display command in lanadmin LAN Interface Test Mode. A description
of each field follows the display.
LAN INTERFACE STATUS DISPLAY
Tue, Nov 30,1999 11:45:17
Network Management ID = 5
Description = btlan Hewlett-Packard
10/100Base-TX Full-Duplex
Hw Rev 0
Type (value) = ethernet-csmacd(6)
MTU Size = 1500
Speed = 100000000
Station Address = 0x80009d40d69
Administration Status (value) = up(1)
Operation Status (value) = down(2)
Last Change = 0
Inbound Octets = 0
Inbound Unicast Packets = 0
Inbound Non-Unicast Packets = 0
Inbound Discards = 0
Inbound Errors = 0
Inbound Unknown Protocols = 0
Outbound Octets = 0
Outbound Unicast Packets = 0
Outbound Non-Unicast Packets = 0
Outbound Discards = 0
Outbound Errors = 0
Outbound Queue Length = 0
Specific = 655367
Ethernet-like Statistics Group
Index = 3
Alignment Errors = 0
FCS Errors = 0
Single Collision Frames = 0
Multiple Collision Frames = 0