Filter
Top Products
9.
If it is necessary to replace the display bezel or the display assembly internal components, remove
the six rubber screw covers (1) and the six Torx T8M2.5×6.0 screws (2) that secure the display
bezel to the display enclosure.
10. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
11. Remove the display bezel (3). The display bezel is available using spare part number
455400-001.
12. If it is necessary to replace the display inverter, release the inverter (1) as far as the display panel
cable and backlight cable allow.
Component replacement procedures 53