Filter
Top Products
i.
Fan (see
Fan on page 71)
j.
Heat sin (see
Heat sink on page 73)
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
2. Lift the processor (2) straight up and remove it.
NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned with
the triangle (4) embossed on the processor slot.
Reverse this procedure to install the processor.
76 Chapter 4 Removal and replacement procedures