Filter
Top Products
Microphone
NOTE: The microphone is included in the Cables Kit, spare part number 454008-001. See Cable
Kit on page 21 for more Cable Kit information.
Before removing the microphone, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 37).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 38)
b.
Optical drive (see
Optical drive on page 45)
c.
Keyboard (see
Keyboard on page 47)
d.
Switch cover (see
Switch cover on page 49)
e.
Display assembly (see
Display assembly on page 51)
f.
Top cover (see
Top cover on page 55)
g.
Bluetooth module (see
Bluetooth module on page 61)
Remove the microphone:
1. Disconnect the microphone cable (1) from the system board.
2. Remove the microphone receiver (2) from the clip built into the base enclosure.
64 Chapter 4 Removal and replacement procedures