HP (Hewlett-Packard) 3010 Personal Computer User Manual


 
6. Rotate the drive cage all the way up.
Figure 7-24 Rotating the Drive Cage Up
7. Align the guide screw on the drive with the slot on the chassis. Slide the optical drive into the
drive bay until the two screw holes on the right side of the drive line up with the two screw holes
on the right side of the drive cage (1).
8. Secure the optical drive by fastening two retainer screws through the holes in the right side of
the drive cage into the corresponding holes in the right side of the optical drive (2).
NOTE: Extra retainer screws are provided on the front of the chassis under the hard drive
cage. The M3 metric retainer screws for optical drives are black.
Figure 7-25 Installing the Optical Drive
Drives 107