Filter
Top Products
Note Negatives are easily damaged. Touch them only on their edges.
3 Insert the negative strip holder back into the slide holder, and then close the
scanner lid.
Note Do not press the Scan button (
) until the negatives are loaded and
the lid is closed.
4 Press the Scan button (
).
A dialog box appears asking what you are scanning.
5 Select Picture.
6 Click Scan.
7 Select Negatives from a Transparent Materials Adapter (TMA).
8 Click Scan.
9 The scan is sent to the HP Image Zone.
If you want to preview the scanned picture, select the Show Preview check
box on the screen, or begin the scan from the HP Director software.
10 Follow the instructions on the screen to finish scanning.
11 When finished, remove the negative strip. Place the negative strip holder back
into the scanner lid for convenient storage.
Note You can scan a negative in other ways. For example, in HP Director, click
Scan Picture. Or, if you know you'll be sharing an item using HP Instant
Share, use the HP Instant Share button (
) on the scanner lid.
Print copies
Use the Copy button ( ) to scan an original and send it directly to a printer to
make copies.
1 Place the original face down on the scanner glass as indicated by the
reference marks on the scanner, and close the lid.
2 Press the Copy button (
) on the scanner lid. A message appears that
shows the copy progress.
3 If you want to increase the number of copies, lighten or darken the copies,
reduce or enlarge them, or change printer settings, click Cancel in the Copy
in Progress dialog box. You can then make changes to settings in the HP
Copying software.
Chapter 1
8 HP Scanjet 3770 digital flatbed scanner