Filter
Top Products
4 In the dialog box that appears, select:
– Picture if you are scanning a photograph, a graphic, slides, or negatives.
The default setting for scanned pictures is to appear in the HP Image
Zone.
– Document if you are scanning text, both text and graphics, or any text
that you want to edit later. Scanned documents appear in the specified
destination.
5 Follow the instructions on the screen to finish scanning.
Note Macintosh users, see the HP Image Zone software on-screen Help for
information about scanning procedures.
To simplify scanning, the software does not prompt you to preview the picture
when you use the Scan button (
) on the scanner lid. If you want to preview the
scanned picture, select the Show Preview check box on the screen, or begin the
scan from the HP Director.
The HP Scanning software can automatically correct your pictures or restore faded
colors in old pictures. The preview setting must be on to use this feature. To turn
picture correction on or off, select Automatically Correct Photos in the Basic
menu of the HP Scanning software, and then select the Restore Faded Color
check box.
Scan multiple pictures with one scan
You can scan multiple pictures at the same time from the scanner glass.
1 Place the original pictures in each corner of the scanner glass with at least 1/4
inch (6.35 mm) space between the pictures, and then close the scanner lid.
Tip After scanning the pictures, you can rotate the scanned pictures in the
HP Image Zone software.
2 Press the Scan button (
) on the scanner lid.
3 Follow the instructions on the screen to finish scanning.
Each scanned picture appears in the HP Image Zone software as a separate
picture.
How to use the scanner
User's Manual 5