Filter
Top Products
E-mail scanned documents
1 Place the original face down in the upper right hand corner on the scanner
glass, as shown by the corner reference mark on the scanner.
2 Close the scanner lid.
3 Press the Scan button (
) on the scanner lid.
4 Select E-mail from the scroll-down menu.
5 Follow the instructions on the screen to finish scanning.
Change settings
You can customize some features of your HP Scanjet scanner, including the
scanner-lid button settings and other preferences.
●
Change settings from the HP Director
When you use the scanner buttons or the HP Director software, the scanner
uses settings optimized for the scanned original type, such as a picture. You
can change all scan settings from the Settings menu from the HP Director.
To change settings, start the HP Director software, and then click Settings.
●
Turn preview image on or off
Note Macintosh users, see the HP Image Zone software Help for information
about turning preview on or off.
1 Double-click the HP Director icon (
) on your desktop. Or, on the taskbar,
click Start, point to Programs or All Programs, point to HP, and then click
HP Director.
2 When the HP Director opens, make sure that your HP scanner is selected in
the Select Device list.
3 On the Settings menu, point to Scan Settings & Preferences, and then click
Button Settings. The Button Settings dialog box, which has a tab for each
configurable button, opens.
4 Click the tab that corresponds to the button that you want to set.
5 Select or clear the preview button setting for that button.
6 When you are satisfied with the settings, click OK.
Care and maintenance
Occasional cleaning of your scanner helps ensure optimal performance. The
amount of care necessary depends upon several factors, including the amount of
use and the environment. You should perform routine cleaning as necessary.
Chapter 1
10 HP Scanjet 3770 digital flatbed scanner