Filter
Top Products
Removal and replacement procedures 30
3. Remove the access panel ("Access panel" on page 27).
4. Remove the air baffle.
To replace the component, reverse the removal procedure.
Fan assembly
To remove the component:
1. Power down the server (on page 26).
2. Extend the server from the rack (on page 25).
3. Remove the access panel ("Access panel" on page 27).
4. Remove the air baffle ("Air baffle" on page 29).
5. Disconnect the fan cables from the system board.
6. Remove the fan assembly.
To replace the component, reverse the removal procedure.