Removal and replacement procedures 52
13. Using your fingers, remove the processor from the failed system board.
CAUTION: To avoid damage to the system board:
• Do not touch the processor socket contacts.
• Always install the processor socket cover after removing the processor from the socket.
• Do not tilt or slide the processor when lowering the processor into the socket.
CAUTION: To avoid damage to the processor:
• Handle the processor only by the edges.
• Do not touch the bottom of the processor, especially the contact area.
14. Remove the seven T-15 screws securing the failed system board.
15. Remove the failed system board.
To replace the system board:
1. Install the spare system board in the server.