Filter
Top Products
Removal and replacement procedures 50
6. Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
CAUTION: Heatsink retaining screws should be tightened or loosened in diagonally opposite
pairs (in an "X" pattern). Do not overtighten the screws as this can damage the board,
connectors, or screws. Use the wrench supplied with the system to reduce the possibility of
overtightening the screws.
7. Install the heatsink.
8. Install the air baffle.
9. Install the access panel.
System board
To remove the component:
1. Power down the server (on page 26).