Filter
Top Products
Removal and replacement procedures 41
6. Remove the storage controller.
To replace the component, reverse the removal procedure.
PCI Express or PCI-X riser board
To remove the component:
1. Power down the server (on page 26).
2. Extend the server from the rack (on page 25).
3. Remove the access panel ("Access panel" on page 27).
4. Remove the PCI riser board assembly ("PCI riser board assembly" on page 39).
5. Remove the expansion board ("Expansion boards" on page 39).
6. Remove the PCI Express or PCI-X riser board.
To replace the component, reverse the removal procedure.