Filter
Top Products
Known Problems and Troubleshooting
Known Install/Update Problems
Appendix B146
Known Install/Update Problems
The following problems are known to occur in the HP-UX 11i v2 release.
HP CIFS Server Product
The new version of the HP CIFS Server A.01.09.04 is based on Samba
2.2.5 and is available on HP-UX 11i v2 release. Please refer to the HP
CIFS Server 2.2e (version A.01.09.04) Release Notes for new features,
known problems, and workarounds for this product. The CIFS Server
2.2e (version A.01.09.04) Release Notes are available in the Networking
and Communication Section of the HP document web site:
http://docs.hp.com
Known Issues with OE Media Install Tool and
Network Depots
The Ignite-UX install tool on the OE media supports the use of network
depots. However, network depots must match the media depots for the
choices in the install tool to work properly.
The Ignite-UX documentation also explains the setup and use of network
depots without using the OE media for each installation. See the
following web site for information on the Ignite-UX product:
http://software.hp.com/products/IUX
Error Message When Trying to Ignite an HP-UX 11i
v1.6 System with an HP-UX 11i v2 Ignite-UX Server
If you are trying to install HP-UX 11i v2 on an HP-UX 11i v1.6 system
from an HP-UX 11i v2 Ignite-UX server, you may see the following error
message if your HP-UX 11i v1.6 system is using VxVM:
ERROR: VxVM installs of 11.22 are not supported with the 11.23 or
later install kernel due to VxVM 3.5 versus 3.1
incompatibilities. The VxVM disk group “rootdg” must be
changed to LVM or whole-disk or be removed