Filter
Top Products
Known Problems and Troubleshooting
Known Install/Update Problems
Appendix B 149
How Do You Know
If This Affects You
The problem occurs after updating to HP-UX 11i v2 from HP-UX 11i
v1.6. During the reboot after the update, the HP-UX 11i v2 Update-UX
kernel attempts to reboot the system.
While the system has been updated with HP-UX 11i v2 bits, the system
kernel is still running as HP-UX 11i v1.6 before the reboot. You will
encounter this warning message because of differences between the
Update-UX kernel and system kernel commands used to shut down your
system.
What to Do You can safely ignore this warning message.
mod_load_helper Error
After updating from HP-UX 11i v1.6 to HP-UX 11i v2, you may see the
following dmesg or syslog error:
MOD: mod_load_helper:gvid_him_fgl(gvid_him_fgl):_load returned
error 13
What to Do You can safely ignore this error.
/stand/ioconfig Read Warning
After cold-installing HP-UX 11i v2, you may see the following warning
message while rebooting your system:
Booting kernel
WARNING: GIO: read_ioconfig_file(): /stand/ioconfig read
error.
ioconfig = NULL
NOTICE: cachefs_link(): File system was registered at index 4.
NOTICE: nfs3_link(): File system was registered at index 7.
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at
0/2/1/0
igelan1: INITIALIZING HP PCI 1000Base-T Core at hardware path
0/1/2/
How Do You Know
If This Affects You
This problem occurs on new installed kernels because there is no
ioconfig file from a previous boot. GIO issues the warning because it
cannot find an ioconfig file.
What to Do You can safely ignore this warning.