English 53
3 Troubleshooting Your PC
If Your PC Has a Hardware Problem
If the Flexible Disk Drive Does Not Work
• Ensure you are using a formatted diskette and it is inserted
correctly.
• Check you are using a diskette that is the right density.
• Check that your flexible disk drive is correctly configured in the
Setup Configuration menu.
• Check the option on the Setup Configuration menu which
enables or disables the on-board flexible disk controller.
• Clean the flexible disk drive using a diskette cleaning kit.
• Check that the flexible disk drive has been enabled in Setup.
• Flexible disk drive (refer to “Hardware Protection Submenu
(Security group)” in the HP Setup program—see "HP Setup
Program", on page 66)
• Boot on flexible disk drive (refer to "Start-up Center Submenu
(Security group)" in the HP Setup program—see "HP Setup
Program", on page 66)
• Write on flexible disk drives (refer to "Start-up Center Submenu
(Security group)" in the HP Setup program—see "HP Setup
Program", on page 66)
• Check that the disk power and data cables are correctly connected.