HP (Hewlett-Packard) 6212 Network Router User Manual


 
6212-A2-GB20-00 May 2004 17
2.2.2 Manual Installation
To connect the router to a PC using the USB interface, you need to use a standard USB cable
and install the USB interface software. Follow the steps below.
STEP 1
: Connect the USB router to the PC by plugging the flat connector of a standard USB
cable into a USB port on your PC, and plugging the square connector into the router. The Found
New Hardware screen appears:
STEP 2
: When the screen appears as below, click on the Next button.