Filter
Top Products
26 May 2004 6212-A2-GB20-00
Chapter 3 Login Via the Web Browser
This section describes how to manage the router via a web browser from the remote end. You
can use a web browser such as Microsoft Internet Explorer, or Netscape Navigator. It is best to
set your display resolution to 1024 x 768. To change the resolution, go to the Microsoft
Windows control panel and click on the Display icon, then change the display settings. Access
to the management functions of the USB router from the LAN side is restricted. A unique
default user account is assigned with user name Admin with an empty password. User can
change the default password later when logging to the device.
3.1 IP Address
To log on to the device using a web browser, your workstation and the device should both be on
the same network segment. The default IP address is 192.168.1.1. You can modify the IP
address of your PC by modifying its TCP/IP properties. Follow the steps below:
STEP 1:
Enter the TCP/IP screen and change the IP address to the domain of 192.168.1.x/24.