Filter
Top Products
Removal and replacement procedures 28
3.
After performing the installation or maintenance procedure, slide the server into the rack by pressing
the server rail-release latches.
Remove the server from the rack
WARNING: The server weighs approximately 36.6 kg–49.9 kg (80.0 lb–110.0 lb). To
reduce the risk of injury due to the weight of the server, remove the following components
before removing the server from the rack:
• Processor memory module
• Hard drives
• Power supplies
The server weighs 21.8 kg (48 lb) with these components removed and might require two
people to remove the server from the rack.
1. Power down the server (on page 26).
2. Disconnect the cabling, and remove the server from the rack. For more information, see the
documentation that ships with the rack mounting option.
3. Place the server on a sturdy, level surface.
Remove the access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: Do not operate the server for long periods with the access panel open or
removed. Operating the server in this manner results in improper airflow and improper
cooling that can lead to thermal damage.
To remove the component:
1. Do one of the following:
o Open or remove the tower bezel, as needed.