Filter
Top Products
Removal and replacement procedures 34
CAUTION: When installing the tray with the secondary processor memory board, be sure that
all DIMM latches on the primary processor memory board are in the fully-locked position.
Failure to do so results in damage to the primary processor memory board.
Heatsink on the primary processor memory board
To remove the component:
1. Power down the server (on page 26).
2. Remove the processor memory drawer (on page 29).
CAUTION: To prevent damage to the processor memory drawer cover, be sure the handle of
the processor memory drawer is fully open before removing the cover.
3. Remove the processor memory drawer cover.
4. Remove the tray (on page 30).
5. Remove the heatsink.