Filter
Top Products
Removal and replacement procedures 38
CAUTION: To help avoid damage to the processor and system board, do not install the
processor without using the processor installation tool.
CAUTION: To prevent possible server malfunction and damage to the equipment,
multiprocessor configurations must contain processors with the same part number.
IMPORTANT: When either optional I/O expansion board is installed in a two-processor
configuration, processor 2 and the I/O enabler must be installed.
To remove the component:
1. Power down the server (on page 26).
2. Remove the tray (on page 30).
3. Remove the heatsink.
4. Open the processor retaining latch and the processor socket retaining bracket.