Filter
Top Products
Hardware options installation 52
3.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. For tower models, do the following:
a. Place the server on a flat, level surface with the access panel facing up.
b. Remove the access panel (on page 24).
5. For rack models, do the following:
a. Extend the server from the rack (on page 25).
b. Remove the access panel (on page 24).
c. Release thumbscrews and remove the rack bezel ("Remove the rack bezel" on page 22).
6. Remove the blank from box 3.
7. Install the optical drive cage.