Filter
Top Products
Hardware options installation 55
7.
Install a DVD-ROM or DVD-RW drive into the drive cage.
8. Remove the air baffle (on page 25).
9. Remove the fan cage (on page 27).
10. Connect the power cable from the drive to the system board.
11. Connect the SATA cable from the drive to the system board.
12. Install the fan cage.
13. Install the air baffle.
14. For tower models, do the following:
a. Install the access panel (on page 24).
b. Return the server to an upright position.
15. For rack models, do the following:
a. Install the rack bezel (on page 23).
b. Install the access panel (on page 24).