Filter
Top Products
Hardware options installation 81
6.
Remove the air baffle (on page 25).
7. If installed, remove the PCI card from slot 9.
CAUTION:
Any attempt to remove an installed TPM from the system board breaks or disfigures
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to ensure
the integrity of the system data.
8. Install the TPM board. Press down on the connector to seat the board.
9. Install the TPM security rivet by pressing the rivet firmly into the system board.
10. If removed, install the PCI card in slot 9.
11. Install the air baffle.
12. Install the access panel (on page 24).
13. Do one of the following:
o For tower models, return the server to an upright position.
o For rack models, slide the server back into the rack.
14. Connect each power cord to the server.