Filter
Top Products
Solving Problems 77
■ Try adjusting the Brightness and Contrast settings on the Image
menu.
■ Check your computer display settings to correct the color balance.
■ The projector’s lamp may need to be replaced. See page 62 for
instructions.
There is no sound, or the sound is not loud enough.
■ Press the button on the projector or remote control to increase
the volume.
■ Make sure A/V Mute is not enabled. (The A/V Mute button may
have been pressed.)
■ Try adjusting the Volume setting in the Setting menu (see
page 52).
■ If you’re using a VCR or other video source, make sure the
volume is not turned all the way down or muted. Also, make sure
the cables are connected correctly, as described on page 44.
■ If your presentation includes computer audio, make sure the
volume control on your computer is not turned all the way down
or muted. If you’re using the audio cable, make sure it is securely
connected to both the projector and your computer’s
headphone jack or audio out jack.
■ Make sure the Windows volume controls on your computer are
not turned all the way down or set to Mute. You may be able to
check this by clicking the volume control in your Windows
system tray (lower right corner of the screen).
Montreal User's Guide.book Page 77 Tuesday, April 19, 2005 11:27 AM