Filter
Top Products
8
Figure 4 - Main Diagnostic Screen
Running selected tests
Tests may be initiated individually, or as a group. Some tests may be run at different levels. In
general, tests that can take a long time to be fully checked have levels that permit testing more
quickly while still providing a reasonable level of testing. An unselected test has a <Space>
before the test name. A test at a quick level has a <1> before the test name. A standard level
test has a <2> before the test name. A long test has a <3> before the test name. Every test has
a standard level. Some tests also have a quick level, and some tests also have a long level.
Some have both quick and long.
Menu Status Date Time
2 CPU Ok 08/08 14:36:18
2 Cache Ok 08/08 14:35:20
1 RAM, motherboard 16 MB Ok 08/08 14:36:22
1 RAM, plug in 00 MB Ok 08/08 14:36:23
2 BIOS flash ROMS OK C-F=8676? Altera=E56C? Boot=C600? 08/08 14:36:25
2 CMOS Ok 08/08 14:36:26
Upper PC Card
Lower PC Card
2 Timers Ok 08/08 14:36:26
2 Real time clock Ok 08/08 14:36:30
2 IRQ controller Ok 08/08 14:36:31
2 DMA controller Ok 08/08 14:36:32
IR port
Serial port
Printer port
1 Hard disk 813Mb Ok 08/08 14:36:32
Floppy disk
2 Battery Bat=LiIo (OK) Chg=FC B%=60 Vb=8.17 Ta=57.2 08/08 14:36:33
SCSI loopback
1 Keyboard Ok 08/08 14:36:36
1 HP mouse Ok 08/08 14:36:36
2 Audio Ok 08/08 14:36:39
1 Display Ok 08/08 14:36:42
1 Docked device Ok: NOTHING. 08/08 14:36:42
SCSI CD ROM
SCSI Hard disk
Dock slots
Dock keyboard
Dock PS2 mouse
Dock EEPROM
Keyboard Power-On Selftest
Keyboard IRQ Test
Keyboard Interface Test
+3708 +3695
DSP Chip
DMA Channel
Interrupt Lines
Sound Output Test
Version 04 Jan 97, Bios 97/01/29 RED GREEN BLUE
ARROW keys select tests. ENTER or 1, 2, 3 runs test. Or press SPACE to mark
tests then ENTER to run them. F1 or ? gives help. DIAG /? Shows options.
loops=2/20. Last loop begun at 08/08 14:36:18