Filter
Top Products
71
Required Equipment
• Torx #6 screwdriver
• 5mm hexdriver (F1171 & F1175 only)
Removal Procedure
1. Follow the Display Removal Procedure to gain access to the Logic PCA.
2. For convenience, the Microphone Assembly may be removed at this point. See Figure 40.
3. The Eject Button and Spring along with the Pivot Door and Spring do not need to be
removed to replace the Logic PCA. However, both of these springs are easily dislodged at
this point and can become lost. It is best to remove them and set them aside.
Figure 40 - Logic PCA Removal
Microphone
Assembly
(p/n F1067-60012)
Paw Eject Button
(p/n F1170-40005)
Paw Eject Arm
(p/n F1170-40008)
Standoffs
(p/n 0380-4606
F1171 - F1175
only)
Logic PCA
(p/n F1170-60906
F1171 - F1175)
(p/n F1360-60906
F1360 only)
Bottom Case
(p/n F1170-
60904
F1171 & F1175)
(p/n F1360-
60904
Speaker
Connection
Paw Active
Flex Cable
Connection